MSW Pressure compensation tank 1 price is about 59 £ . This product can be found in Boats Parts & Accessories
Better temperature control? Less pump noise? Longer service life for water systems with pressure switch? With the pressure equalisation tank from MSW, you can optimise the water supply on boats, in motorhomes, coaches and wherever pump water systems with pressure switches are used, in just a few easy steps. The pressure compensation vessel absorbs volume changes in the water and reduces pressure and flow fluctuations in automatic pressure pumps. The advantage, the water pump does not switch on and off again when the water withdrawal is low. In this way, the expansion tank prevents water hammer, reduces operating noise, protects the pump itself and at the same time provides better control of the hot water temperature. With an operating pressure of up to 8.6 bar and a volume of 1 L, the pressure compensation tank from MSW ensures an optimised water supply in a powerful and reliable manner. The installation and handling of the water pressure equalisation tank is very simple. This is ensured not only by the small dimensions but also by the standard 1/2" MNPT connections (13 mm) for the input and output. The water pressure equalisation tank can be mounted in any position. The installed standard valve corresponds to those of car tyres, which simplifies operation and maintenance.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859080318
MSW Pressure Water Pump 10 price is about 129 £ . This product can be found in Industrial Appliances
Use the pressurised water pump from MSW to reliably pump, spray or filter liquids. The compact power pack is suitable for campers, yachts, spraying and cleaning equipment as well as for pressurised water systems and humidifiers. The fresh water pump achieves a high flow rate of 10,6 L/min. The diameter is 1/2" (14 MNPT). This makes it suitable for many different locations, such as in caravans, yachts and various pressurised water systems. It pumps water with a maximum temperature of 60 °C. The pump is operated by a pressure switch. If the pressure in the tank drops to a certain value, the pump switches on automatically. The waste water pump is also designed for continuous operation. The integrated automatic switch-off reliably protects against damage caused by overheating. As soon as the appliance reaches a temperature of 120 °C, it switches itself off. The wire diameter is 16 AWG (1.3 mm²).
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859080271
MSW Pneumatic Grease Pump 12 price is about 229 £ . This product can be found in Power Tools
The pneumatic grease pump PRO-G 12M from MSW is a high-performance grease pump for lubricating machines, equipment and structural elements. The pump is a pneumatic tool which can be put to use in agriculture, industry or automotive workshops. You can use this classic tool to quickly and easily lubricate devices equipped with grease nipples. With its generous 12 L capacity, pneumatic hose with convenient 4 metre working length and powerful pump pressure of 300 to 400 bar, the pneumatic grease pump is simple to use and performs reliably and efficiently. In spite of the low air usage, the high working pressure enables you to inject even highly viscous or thick lubricants. The pneumatic grease pump PRO-G 12M scores points in comparison to a manual grease pump thanks to labour and time savings. The grease container's capacity allows you to perform many tasks on just one fill without having to continuously stop to refill. The practical pneumatic dispensing gun always guarantees the optimal amount of lubricant for the current application, so that no grease or oil goes to waste. The pneumatic grease pump is equipped with a stable and ergonomic metal handle, a solid base and two low-friction wheels for mobile use during your daily work. You can even pull, push or, if necessary, tilt the portable grease pump on uneven surfaces. The metal handle is also perfect for hanging the hose on to save space. The pneumatic grease pump is made of high-quality materials such as solid metal and long-lasting rubber. It is also easy to put together with little effort, even for amateurs.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4250928690449
MSW Pressure Washer Hose Reel price is about 349 £ . This product can be found in Garden Power Tools
The automatic pressure washer hose reel MSW-PHR15 provides the highest convenience and safety for rolling and unrolling the hose. The spring-operated drive function makes retracting the hose fast, automatic and easy. The locking positions enable you to pull the hose out to any length. With the self-retracting hose reel, you can increase your working range to up to 15 metres for your air tool. This pressure hose reel is the perfect accessory for any pneumatic tool or air compressor which operates with 160 bar or less. The hose reel is suited for both industrial and private use. MSW offers you high-quality professional tools and pneumatic accessories. Kinked hoses and frustrating coiling are things of the past. From now on, the pneumatic hose reel's spring-operated automatic rewinding mechanism will keep things in order. Thanks to the clever design, the hose is rolled up in layers. When unrolling the hose, the reel's ratcheting locking mechanism engages 25 times, so you can easily unroll the exact length of hose needed. To automatically roll it back up, simply give the hose a quick tug and the reel will automatically rewind the entire hose. With the increased range and therefore increased mobility of 15 extra metres, you can direct air pressure or even water with a maximum pressure of 160 bar at the desired spot. The high-pressure hose remains flexible even during large temperature fluctuations. The hose works perfectly at temperatures of -20 to 40 °C, and it can transport water at a temperature of up to 100 °C. The housing of the retractable hose reel is made of durable powder-coated steel which stands out for its hard-wearing and extremely shock- and scratch-resistant surface. This protects the housing perfectly against wind and weather. The bracket for the automatic pressure washer hose reel can be very easily affixed to the ceiling or wall. The necessary installation materials are included in delivery. The reel also contributes to work safety: The 15 metre-long hose is stored safely inside the robust plastic casing and shielded from wear and tear.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4250928690197
MSW Emergency Generator 3 phase price is about 1529 £ . This product can be found in Power Tools
The diesel generator from MSW's professional tools collection offers excellent reliability paired with powerful performance. It is an essential electricity supplier when there is no access to the power grid available or when a power outage brings everything to a standstill: The diesel generator from MSW is a must-have in any workshop equipment inventory. The diesel power generator has a tank with a 14.5 l capacity. The device works with a powerful 5000 W. Thanks to the three sockets (400 V and two 230 V) you can use it to operate a wide variety of machines - even at the same time . The portable diesel generator was designed with durability and safety in mind. The effective air cooling protects the engine from overheating. The overload protection prevents damage to the engine in the event that it ever does get too hot. The emergency diesel generator is also protected against splashes thanks to protection class IP 23. Durable materials and clean workmanship guarantee reliable operation of the diesel emergency power generator for numerous intensive uses.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859952189
MSW Petrol generator 2700 W price is about 469 £ . This product can be found in Power Tools
Are you looking for a power source for your electrical equipment on a construction site, in a large workshop or even when building a ship? With the power generator, MSW offers you a reliable power source with 230 V AC and 12 V DC that is always close at hand. The emergency generator supplies you with power for a long time with a fuel filling of 18 l. The device operates with a powerful 2700 W. The petrol engine is started manually by cable or electrically and is immediately ready for use thanks to TCI ignition. Despite the high performance, the unit is characterised by low noise emission. Thanks to the three sockets, you can operate a wide variety of machines with it. Use the power generator for drills, grinders or for additional light sources. Two sockets for 230 V AC are available for this purpose. You supply devices with direct current with the 12 V DC connection. The power unit is safely constructed and cleanly finished. The overload protection prevents damage to the engine if it gets too hot. Do you want to move the unit? Two large wheels and a handle help you to reach a location quickly. Rely on the power generator from MSW for numerous intensive applications.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859176905
MSW Brake Line Flare Tool price is about 28.99 £ . This product can be found in Garden Power Tools
One of the most important parts of a vehicle are the brake lines, which have to provide reliable service. However, even well-secured lines wear out over time due to external factors, be it aggressive road salt or other environmental influences. With the brake line flaring tool, you can repair or replace brake lines by flaring the ends to fit exactly and adapting them for connecting pieces. With the brake line flaring tool you can flare the end of a pipe, in the case of brake or lines, in order to precisely secure the cap for connecting the lines. The dies and punches are designed to deform lines with a diameter of 4.75 mm over 5, 6, 8 mm up to 10 mm and to produce DIN-compliant convex flanges and double flanges in accordance with SAE. Due to the clamping devices and the high-quality carbon steel, cables with a wall of up to 1 mm can be easily crimped. The clamping device for the dies and punches is very easy to use and can also be used directly on the car. The shapes allow deformations at a 90 ° angle. The set comes in a plastic case with a space for every piece and an integrated handle for convenient transportation.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859051219
MSW Petrol generator 2700 W price is about 569 £ . This product can be found in Industrial Appliances
Are you looking for a power source for your electrical equipment on a construction site, in a large workshop or even in shipbuilding? With the power generator, MSW offers you a reliable power source with 230 V AC and 12 V DC that is always close at hand. The emergency generator supplies you with power for a long time with a fuel filling of 15 l. The device operates with powerful 2700 W. The petrol engine is started manually by cable or electrically and is immediately ready for use thanks to TCI ignition. Despite the high performance, the unit is characterised by low noise emission. Thanks to the three sockets, you can operate a wide variety of machines with it. Use the power generator for drills, grinders or for additional light sources. Two sockets for 230 V AC are available for this purpose. You supply devices with direct current with the 12 V DC connection. The power unit is safely constructed and cleanly finished. The overload protection prevents damage to the engine if it gets too hot. Do you want to move the unit? Two large wheels help you to transport the generator quickly. Rely on the power generator from MSW for numerous intensive applications.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859176844
MSW Pressure water pump 17 price is about 139 £ . This product can be found in Boats Parts & Accessories
Use the pressurised water pump from MSW to reliably pump, spray or filter liquids. The compact power pack is suitable for campers, yachts, spraying and cleaning equipment as well as for pressurised water systems and humidifiers. The fresh water pump achieves a high flow rate of 17 l/min. The diameter is 19 mm. This makes it suitable for many different locations, such as in caravans, yachts and various pressurised water systems. It pumps water with a maximum temperature of 60 °C. The pump is operated by a pressure switch. If the pressure in the tank drops to a certain value, the pump switches on automatically. The waste water pump is also designed for continuous operation. The integrated automatic switch-off reliably protects against damage caused by overheating. As soon as the appliance reaches a temperature of 120 °C, it switches itself off. The wire diameter is 16 AWG (1.3 mm²).
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859080264
MSW Fuel Pressure Tester up price is about 69 £ . This product can be found in Car Parts, Accessories and Styling
When the power of a petrol engine decreases, checking the pressure on the cylinders with a fuel pressure tester often provides clarity. The garage equipment from MSW's professional tools collection is suited for nearly all motor vehicle models and is a must-have in any mechanic's workshop or garage. The fuel injection pressure test kit enables you to quickly and easily determine whether the cylinder head gasket is defective, the valves aren't closing properly or the piston rings are worn out. The fuel injection test kit is equipped with a large, easy-to-read 3" pressure gauge with a measurement range from 0 to 9.6 bar or 0 to 140 PSI. The fuel pressure test kit therefore works with high accuracy. The comprehensive accessories allow you to use the fuel pressure tester with all standard vehicle models. Numerous attachments and adaptors ensure a wide range of applications. Thanks to the intuitive quick coupling, the device is immediately ready for use and allows conclusions to be drawn about the source of the problem. The fuel pressure tester comes in a practical storage case which not only makes the device ideal for mobile use, but also makes it quick and easy to store.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859947611
MSW Pressure water pump 12 price is about 119 £ . This product can be found in Boats Parts & Accessories
Use the MSW pressure water pump to reliably pump, spray or filter liquids. The compact power pack is suitable for campers, yachts, spraying and cleaning equipment as well as for pressurised water systems and humidifiers. The fresh water pump achieves a high flow rate of 12.5 L/min. The diameter is 19 mm. This makes it suitable for many different locations, such as in caravans, yachts and various pressurised water systems. It pumps water with a maximum temperature of 60 °C. The pump is operated by a pressure switch. If the pressure in the tank drops to a certain value, the pump switches on automatically. The waste water pump is also designed for continuous operation. The integrated automatic switch-off reliably protects against damage caused by overheating. As soon as the appliance reaches a temperature of 120 °C, it switches itself off. The wire diameter is 16 AWG (1.3 mm²).
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859080295
MSW Engine Oil Extractor 75 price is about 359 £ . This product can be found in Car Parts, Accessories and Styling
The engine oil extractor MSW-OBG80D with a large 75-litre tank is a safe and cost-effective solution for extracting, collecting, transporting and disposing of engine oil when changing oil in a workshop or garage. The high-powered engine oil extractor makes for a fast emptying due to a very high working pressure up to 9 bar. This applies to cold and hot oil, as well as for all non-aggressive fluids class A-III from vehicles, such as power steering fluid. The probes made of nylon or metal (included in delivery) with varying diameter allow for an easy access to the drain valves of engines from various manufacturers. The targeted selection of the probes can influence the emptying speed and, if necessary, increase it to save time: Diameter of the probe 5 mm = 1.2 l / min; 6 mm = 3.2 - 4.2 l / min; 8 mm = 4.2 l / min. Especially handy: During the oil extraction, the fill level can be read through the transparent level indicator of the measuring container. Since the measuring container and the tank are filled at the same time, the amount of extracted oil can be increased up to 9 bar above the working pressure. When the indicator on the analogue vacuum gauge reaches the position between the red and the green mark, the oil suction is completed. The engine oil extractor is very mobile. The device has movable PVC front wheels, which can navigate in all directions even in confined spaces. The wheels are shock-absorbing, cost-effective and easy to replace. With the sturdy ergonomic handle, the engine oil extractor can even be moved over steps. The height of the 10-litre drip tray can be adapted to your requirements, which makes it very flexible. The high-quality, stable drip tray has a filter screen for contamination and is resistant to weather, temperature and corrosion. The engine oil extractor is made of solid powder-coated steel with a compact, efficient air filter, which is state-of-the-art in the field of air pollution control. Environmentally friendly and carefree: With a low energy consumption compared to other oil extractors. The concerns of work safety were not disregarded. The power for the oil extraction is obtained from unproblematic, adjustable compressed air and is protected by a safety valve against overpressure. By the way: If necessary, the oil drain can also be carried out without compressed air, simply by utilizing the G-force.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4250928685148
MSW Petrol generator 2200 W price is about 449 £ . This product can be found in Industrial Appliances
Are you looking for a power source for your electrical equipment on a construction site, in a large workshop or even in shipbuilding? With the power generator, MSW offers you a reliable power source with 230 V AC and 12 V DC that is always close at hand. The emergency generator supplies you with power for a long time with a fuel filling of 18 l. The device operates with powerful 2200 W. The petrol engine is started manually by cable or electrically and is immediately ready for use thanks to TCI ignition. Despite the high performance, the unit is characterised by low noise emission. Thanks to the three sockets, you can operate a wide variety of machines with it. Use the power generator for drills, grinders or for additional light sources. Two sockets for 230 V AC are available for this purpose. You supply devices with direct current with the 12 V DC connection. The power unit is safely constructed and cleanly finished. The overload protection prevents damage to the engine if it gets too hot. Do you want to move the unit? Two large wheels and a handle help you to reach a location quickly. Rely on the power generator from MSW for numerous intensive applications.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859176882
MSW Electric Winch 1 590 price is about 129 £ . This product can be found in Industrial Appliances
The electric winch PROPULLATOR 3500-D by MSW is a handy electric off-road winch best suited for rough terrains. With a maximum traction of 1.590 kg/3.500 lbs, it is designed to lift heavy loads. The 1,3 hp engine, three-stage planetary gearbox, 13 m steel cable and the additional pulley make the device versatile in terms of its application. It is the perfect equipment for pulling vehicles on uneven terrain or other off-road operations. Complement your craft supplies with the professional winch from MSW! The electric winch helps to recover vehicles from rough terrain in no time. The 1,3 hp engine and the 13 m steel cable are big helpers. The winch has a traction of 1.590 kg/3.500 lbs. The winch can be mounted onto quads, ATVs, trailers or SUVs, or be used in the home or in the woods. The 300 Watt engine is a DC inverse speed motor (Series Wound) and therefore much more efficient than an induction engine. Another feature of the winch engine is the intermittent duty cycle: the engine operates on an interval basis. The maximum temperature is not reached due to the breaks and the engine is protected from overheating. The pulling force of the winch results from the three-stage planetary gear with a transmission ratio of 153:1. In addition to the flow and return, the transmission also has a manual clutch for a quick unwinding of the rope. An automatic brake safely interrupts the pulling process or the power supply and stops the load. The sturdy and non-twisting rope is made of galvanized steel and is particularly resistant to wear. The rope has a diameter of 5,5 mm. The loads are fastened to the rope and then transported at a lifting speed of 3,3 m/min (idling). This high speed is guaranteed by the powerful motor and drum size of the winch. A galvinised steel mounting hook with a safety locking is included in the delivery and can be attached at the end of the target device. What is more, a four-way reel opening that reduces friction and protects the rope from wear is also included in the delivery. The guiding pulley guarantees a proper operation thanks to the multi-direction-rollers. The off-road winch can be conveniently controlled with a remote control. A wired remote control is included in delivery, having a long wire and comfortable handle, for an easy and comfortable use. Due to its heavy-duty construction and robust galvanized steel casing, the winch is durable and lightweight. With it light weight and compact size, the winch can be easily used with small quads and other vehicles. Of course, the winch is weather-resistant and dirt-resistant. Please note: all pictures with the winch mounted on the off-road vehicle refer to model 10060667. This is just a suggestion of use. Choose a product that suits your needs.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4250928687494
MSW Mini Refrigerator 12 V price is about 59 £ . This product can be found in Refrigeration Accessories
Chilled drinks are within reach wherever you go with this portable mini refrigerator. Thanks to its compact size, light weight and built-in handle, the small refrigerator is perfect for road trips and picnics. This model's striking design also cuts a striking figure in guest or hotel rooms. A heating function provides hot food or drinks on winter outings, so the mini fridge won't gather dust even on cold days. In the mini fridge, you can keep food and drinks at temperatures as low as 5 °C or as warm as 60 °C. Not only can you conveniently cool lemonade or beer, you can also easily transport cold medicines or warm food for small children. With a volume of 4 l, the device provides ample space to carry approximately 6 cans with a capacity of 330 ml each. Featuring a coated aluminium lining, the interior ensures optimal temperature control. The housing is made of robust, BPA-free plastic. The portable fridge has both a 12 V and a 220 to 240 V power cable for straightforward power supply. Operate this model either using the car battery or connect it conventionally to the power grid. Control the mini fridge using a straightforward control panel. Use a dial to set whether the box should warm or cool. The lightweight mini-fridge features a handle, ensuring easy transportation. Tip: Fill the cooler with pre-tempered items as the device takes some time to reach the desired temperature.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859182500
MSW Wheel Dolly 1 500 price is about 1249 £ . This product can be found in Industrial Appliances
It is difficult to change or mount tyres by yourself—especially large and very heavy truck or tractor tyres. With the wheel dolly MSW-WDH-1500 from MSW, the experts for garage equipment, however, it's no problem. Mount tyres in the twinkling of an eye and without any helpers! Thanks to the four smooth-rolling castors, you can push the wheel dolly made of robust and durable steel under the relevant wheel of the jacked vehicle. Using the lever, you can precisely match the width of the dual wheel dolly to the width of the tyre so that it rests securely. Parking brakes on two of the castors prevent the dolly from rolling away during installation or removal. The solid holding bracket secures the wheel from above and prevents it from tipping while you are pushing the dual tyre dolly. This bracket is height-adjustable and can clasp even large tractor tyres. Now you can manoeuvre heavy weights up to 1,500 kg from point A to point B. No doubt you've encountered this problem: You lift the wheel to attach it and find that the bolt circle of the rim doesn't line up to the threaded bolts on the wheel hub. On the total of eight ball-bearing steel rollers you can simply turn even the largest wheels into position so that you can easily tighten the wheel nuts on the rim. Then just release the holding bracket, loosen the tractor wheel dolly and pull the device out from under the mudguard. Done! Changing a tyre has never been so easy. Make your everyday work easier thanks to this practical helper and spare your back at the same time!
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859943897
MSW Core Drilling Machine 2 price is about 199 £ . This product can be found in Power Tools
The handy core drilling machine MSW-DDM150 from MSW reliably drill holes in hard construction materials such as concrete, masonry or asphalt with the help of diamond core bits. It can also successfully drill large-calibre holes up to 150 mm in diameter. The integrated residual current protection circuit provides protection for both the user and the core drilling machine. On a construction site, time is money. Accordingly, there are high requirements when it comes to the devices you use. With 2,000 W and a maximum speed of 1,950 rpm, the diamond core drill from MSW provides generous power reserves for core drillings up to 150 mm in diameter. You can work with a wide variety of diamond drills. The diamond coring machine masters everything from holes in concrete to reinforced concrete, cement, masonry, asphalt and stone. You can drill holes both horizontally and vertically, depending on your needs. Two stable handles which you can securely position to the core drill enable you to drill as appropriate for the material. Depending on the drill diameter, you can drill up to depths of 100 mm. In addition to freehand drilling, you can also drill using a stand (not included in delivery). The guide rail enables you to achieve very precise holes up to 160 mm. The equally solid and compact powerhouse can be easily controlled via an intuitive on/off switch on the control panel. The residual current protection circuit (PRCD – Portable Residual Current Device) integrated into the cable provides protection against accidents for the user as well as the drill. Should there be a short circuit in the drill or cable, operation immediately ceases. A restart lock provides further protection in case of power failure. Delivery includes a carrying case for safe transportation.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859946737
MSW Sheet Metal Guillotine 1 price is about 619 £ . This product can be found in Hand Tools
The sheet metal guillotine MSW-HS1000 from MSW is a precise and easy-to-use multi-purpose shear for all types of sheet metal and plastic. Thanks to the elongated handle and the maximum leverage it creates, the shear cuts through up to 1.5 mm-thick sheet materials like butter. As is to be expected of equipment for professional trades, the cutting blades are made of tempered tool steel and have a cut length of 1,000 mm. This reliable cutting tool stands out not only in the professional arena at construction sites, in workshops or in factories, but also as a part of any private workshop's equipment and for DIY projects. Thanks to the sheet metal guillotine's large blade, you can -- quite literally -- cut materials up to 1.000 mm long in a single motion. The precise, tempered tool-steel cutting edges can easily cut through sheet metal or plastic up to 1.5 mm thick. Cutting work doesn't get much more efficient than this. The results -- accurate and clean cut surfaces -- are sure to satisfy every time. The guillotine is especially easy and effortless to use. The extra-long handle and the leverage effect it creates enable hassle-free cutting of thick or hard materials. The non-slip rubber feet guarantee both comfortable and accurate operation. In addition, a safety spring ensures that the lever automatically moves back to the starting position after cutting -- a relief, especially when you're making multiple cuts. The delivery includes a stable base frame which ensures that the sheet metal guillotine will always be ready and waiting for use in your workshop. The base frame also has mounting holes for securing the guillotine to the floor for increased stability. The tool can also be mounted without the frame for mobile use thanks to additional holes on the side. With high-quality materials and an extremely durable and abrasion-resistant steel blade, the multi-purpose manual shear MSW-HS1000 is characterised by a surpassingly long service life and exact cut edges even with frequent use.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4250928699336
MSW Magnetic Drill Machine 1 price is about 619 £ . This product can be found in Power Tools
The magnetic drill machine by MSW is powered by up to 1,380 watts, which makes it a true powerhouse when it comes to working on magnetic surfaces. It does not matter if you need to work in a vertical or horizontal position. The powerful electromagnetic foot keeps the machine safely in its position. The magnetic drill machine is very reliable and a valuable tool for both industrial and commercial metalworking. The machine can be used for drilling, countersinking, thread cutting and ring drilling. In metalworking, one thing is important above all else: Power. With its 1.680 watts power, the magnetic drill machine by MSW puts its competitors into their place. The seamlessly adjustable rotation speed of up to 370 rpm allows for a drilling with the mobile electrical device as well as lowering, ring boring and core drilling. When threading, you can reverse the direction of rotation. It prevents the freshly cut thread from being damaged when unscrewing the tap. The construction of the machine allows for a simple and precise operation. The drilling depth from 0 to 165 mm can be precisely set with the three-arm rotary control. The integrated water level means that exact 90° angles are easily achieved and held. The drill has a very practical integrated cooling agent tank. For simple tasks, the 300-millilitre tank can be filled with tap water. For more demanding jobs, a special coolant or cutting oil is used. This extends the service life of the drills and minimises maintenance With a weight of around 20 kilograms, the magnetic drill is heavy enough to produce precise results. At the same time, it is not too heavy to be used on the move. The compact construction and the connecting 2 m cable allow you to use the machine for work on bridges, cranes, ships and other construction sites where magnetic metals are processed. In addition to the industrial sector, companies in the metalworking industry such as locksmiths and car repair shops also benefit from this tool. Not only the performance of the magnetic drill machine is important, but also its operational safety. With a maximum attraction of 13.800 Newton (the equivalent of over one ton), the magnet also works on thin workpieces which require a high attraction. Additional security is provided by the lashing strap (included in the delivery), which prevents damage to the workpiece and injury to the user, for example in the event of a power failure. The RCD magnetic switch is another valuable safety feature. If the device is accidentally switched on after a power failure or a disconnect from the grid, the engine will not start. Another operation is only possible when the magnetic switch is set. The composition of the accessories is a testimony to experience and expertise. A drill chuck for holding shafts with a diameter of up to 16 mm is included in the delivery, as well as a Weldon shank, a coolant tank, assembly tools and many other useful accessories. Replacement carbon brushes and fuses are included in the...
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4250928684127
MSW Camshaft Adjustment Tool VW price is about 30.99 £ . This product can be found in Hand Tools
If you want to repair a Seat, Skoda or Volkswagen car engine: With the engine adjustment tool from MSW, the experts for high-quality automotive tools, checking and adjusting the engine timing is no longer a problem. The components included in delivery make the multifunctional locking tool the ideal companion in garages and workshops. With the camshaft locking tool, you can carry out even complicated work on various vehicle models, such as the Seat models Cordoba (2002 to 2008), Ibiza (2002 to 2015) and Toledo (2012 to 2015) as well as the Skoda models Fabia (2002 to 2015), Praktik (2007 to 2015), Rapid (2012 to 2015) and Roomster (2006 to 2015). The set is also suitable for the Volkswagen models Fox (2005 to 2012), and Polo (2002 to 2014). The kit is comparable to OEM T10123, T10121 and T10120. This professional tool is optimally matched to the corresponding engine elements in its fit and is therefore easy to use. The engine timing tool kit guarantees the most efficient method for fixing and adjusting the engine. Working with other commercially available tools can damage engine parts as well as injure the user. The MSW tool set also has very low wear levels. The tools made of resistant and durable carbon steel will provide you with many years of faithful service and should therefore not be missing from any professional car workshop or ambitious hobby mechanic's garage! And when you need to take the locking tool with you to the customer or when it is not in use, simply store all the tools neatly and safely in the polyethylene transport case. This way you always have order in the workshop and everything at hand as soon as the tools are needed.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859038258
