Stamos Soldering Laboratory Power Supply price is about 219 £ . This product can be found in Laboratory Equipment
The laboratory power supply S-LS-38 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The switching technology used means the device produces only a low ripple and low noise. The device also has a high adjustment and display resolution of 100 mV / 10 mA. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 100 mV / 10 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. This bench power supply has special knobs that allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 20 A. During adjustment, you can observe the values in question on the large LED display and easily modify them to meet your needs. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4250928680198
Stamos Soldering Bench Power Supply price is about 139 £ . This product can be found in Laboratory Equipment
The bench power supply S-LS-29 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunication sector, workshops with electronic devices and production facilities. The benchtop dual power supply is also equipped with an RS232 and USB port for remote operation and data collection. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. The three different modes allow you to easily adjust the voltage from 0 to 30 V 0÷5A. Modes one and two are for manual data entry. In the third mode, you can adjust the parameters via PC using a special software program. This software is compatible with Windows XP, Vista, 7, 8 and 10. Thanks to the two large LED displays, you can easily read the set voltage and current at any time. The values are shown to the fourth digit on the LED screens, so that even the most accurate values can be represented. The glowing red numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. The lab power supply also has four LED diodes which, among other things, indicate which voltage is turned on or whether the overheat protection is active. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 10 mV / 1 mA. This double power supply unit meets the highest standards of safety: The device is equipped with overcurrent protection (OCP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. The laboratory power supply unit also has a control panel lock to prevent the set parameters from being accidentally changed. This power supply has special knobs that allow you to make both rough and fine adjustments to the desired current values, guaranteeing precision. During adjustment, you can observe the values in question on the large LED displays and easily modify them to meet your needs. The dual power supply is made of sturdy sheet steel which guarantees high resilience and a long service life. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight, and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external...
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4250928683601
Stamos Soldering Laboratory Power Supply price is about 299 £ . This product can be found in Laboratory Equipment
The bench power supply S-LS-78 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 30 A. During adjustment, you can monitor the values in question on the large LED display and easily modify them to meet your needs. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859948281
Stamos Soldering Laboratory Power Supply price is about 149 £ . This product can be found in Laboratory Equipment
The bench power supply S-LS-35 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply is very quiet and is perfect for use in schools or for hobbies. The linear technology used means the device produces only a low ripple and low noise. The device also has a high adjustment and display resolution of 100 mV / 10 mA. Whether you're a professional in development or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The values are shown to the fourth digit on the LED display, so that even the most accurate values can be represented. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 100 mV / 10 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. This power supply has special knobs that allow you to individually adjust the desired current. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 10 A. During adjustment, you can observe the values in question on the large LED display and easily modify them to meet your needs. The power supply also has a built-in overheat protection which starts the cooling fan as soon as the device temperature rises above 40 °C. The fan ceases to run once the device reaches 35 °C. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4250928680167
Stamos Soldering Laboratory Power Supply price is about 149 £ . This product can be found in Laboratory Equipment
The bench power supply S-LS-87 reliably provides direct current to external devices, with individually-adjustable current and voltage. The linear technology used means the device produces only a low ripple and low noise. Whether for professionals in development or for electronics projects at home, measuring equipment from Stamos Soldering supports your project according to your requirements. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The digits are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. You can individually set the desired values for the output current on this benchtop power supply unit using the control dials. The dials allow you to make exact adjustments to the output voltage from 0 to 60 V and the output current from 0 to 5 A. During adjustment you can check the respective values on the large LED display. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this monitoring system, safe operation is guaranteed, even with intensive and ongoing use. Non-slip rubber feet ensure stability for the device while also protecting the work surface from unwanted scratches. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859948656
Stamos Soldering Bench power supply price is about 139 £ . This product can be found in Laboratory Equipment
This laboratory power supply unit supplies external devices with direct current, whereby current intensity and current voltage are individually adjustable. The linear technology used means the device produces only a low ripple and low noise. Whether for professionals in development or for electronics projects at home, measuring equipment from Stamos Soldering supports your project according to your requirements. Thanks to the large LED display, you can easily read the set values of current voltage and current intensity at any time. The digits are easy to read even in low-light conditions. In addition, the individual values are labelled with their respective unit abbreviation, making it possible to clearly distinguish between current strength and voltage at any time. The laboratory power supply has a USB port with 5 V / 2 A on the front. On the back you will find a USB-B port for data exchange. You can individually set the desired values for the output current on this benchtop power supply unit using the control dials. The dials allow you to make exact adjustments to the output voltage from 0 - 30 V and the output current from 0 - 5 A. During adjustment you can check the respective values on the large LED display. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. With the laboratory power supply you get an apparatus with a high safety standard: The unit has been equipped with an overload protection (OPP) as well as an overheating protection (OTP), which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this monitoring system, safe operation is guaranteed, even with intensive and ongoing use. With the laboratory power supply unit from Stamos Soldering, you get a thoroughly professional device for the individual DC power supply of various external devices and apparatus. Download software
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859097651
Stamos Soldering Laboratory Power Supply price is about 159 £ . This product can be found in Laboratory Equipment
The bench power supply S-LS-81 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 64 V DC and 0 to 5 A. During adjustment, you can monitor the values in question on the large LED display and easily modify them to meet your needs. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also equipped with a handle and can also be used as a mobile unit thanks to its light weight. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859948311
Stamos Soldering Bench Power Supply price is about 139 £ . This product can be found in Laboratory Equipment
The laboratory power supply S-LS-99 is specialised to supply external devices with direct current, whereby current strength and current voltage are individually adjustable. It is also equipped with a 5-V USB interface. The benchtop power supply was primarily designed for professional use in the industrial sector, in laboratories, in telecommunications, for workshops with electronic devices as well as for production facilities and testing institutes. The linear technology results in low residual ripple and low noise. Due to the large LED display, you can easily read the set values of the output voltage, current and power at any time. Even when the lighting is bad, the digits are easy to read. In addition, the individual displays are provided with their respective unit abbreviations, so that the current and voltage can be clearly distinguished at any time. The user-friendly lab power supply can be controlled very easily and conveniently via rotary knobs. The knobs allow for precise adjustment for the desired current from 0 to 30 V DC and output voltage from 0 to 10 A. During the adjustment, you can check the respective values on the large LED display and easily adapt them to your needs. When the laboratory power supply operates as a constant voltage source (CV), the device switches automatically to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. With the adjustable laboratory power supply, you get an device with a high safety standard: The device has an overcurrent protection (OCP), an overload protection (OPP), a current limitation and a special overheating protection (OTP). The integrated fan adapts to the internal temperature conditions and ensures optimal cooling. These precautions guarantee a safe operation of the power supply, even with intensive and permanent use. The device also has a summing alarm, which informs you about safety deficiencies. Non-slip rubber feet additionally ensure a secure stand of the device and also protect the footprint from unwanted scratches. With the lab power supply from Stamos Soldering, you get a thoroughly professional device for the individual direct current supply of various external equipment.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859035639
Stamos Soldering Laboratory Power Supply price is about 419 £ . This product can be found in Laboratory Equipment
The bench power supply S-LS-76 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 50 A. During adjustment, you can monitor the values in question on the large LED display and easily modify them to meet your needs. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859948267
Stamos Soldering Bench power supply price is about 129 £ . This product can be found in Laboratory Equipment
This laboratory power supply unit supplies external devices with direct current, whereby current intensity and current voltage are individually adjustable. The linear technology used means the device produces only a low ripple and low noise. Whether for professionals in development or for electronics projects at home, measuring equipment from Stamos Soldering supports your project according to your requirements. Thanks to the large LED display, you can easily read the set values of current voltage and current intensity at any time. The digits are easy to read even in low-light conditions. In addition, the individual values are labelled with their respective unit abbreviation, making it possible to clearly distinguish between current strength and voltage at any time. You can individually set the desired values for the output current on this benchtop power supply unit using the control dials. The dials allow you to make exact adjustments to the output voltage from 0 - 30 V and the output current from 0 - 10 A. During adjustment you can check the respective values on the large LED display. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. With the laboratory power supply you get an apparatus with a high safety standard: The unit has been equipped with an overload protection (OPP) as well as an overheating protection (OTP), which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this monitoring system, safe operation is guaranteed, even with intensive and ongoing use. With the laboratory power supply unit from Stamos Soldering, you get a thoroughly professional device for the individual DC power supply of various external devices and apparatus. Download software
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859097644
Stamos Soldering Laboratory Power Supply price is about 219 £ . This product can be found in Laboratory Equipment
The bench power supply S-LS-75 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The dials allow you to precisely adjust the values and thereby guarantee exact setting of the desired current from 0 to 30 V DC and 0 to 3 A for channels I and II, and 0 to 5 V and 0 to 3 A for channel III. During adjustment, you can observe the values in question on the four LED displays and easily modify them to meet your needs. Each of the three channels can be adjusted separately and each supplies one of the three current outputs with the set current values. You can easily choose between two different modes with this dual lab power supply: Parallel or series mode. In series mode you can work with twice the voltage of 60 V, while parallel mode allows you to operate with only one channel at double the current of 6 A. The power supply unit's output can thus be adapted to your individual requirements. This benchtop power supply unit meets the highest standards of safety: The device is equipped with special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859948250
Stamos Soldering Bench Power Supply price is about 189 £ . This product can be found in Laboratory Equipment
The laboratory power supply S-LS-103 is specialised to supply external devices with direct current, whereby current strength and current voltage are individually adjustable. The memory function and RS485 interface make the use of this device particularly effective. The benchtop power supply was primarily designed for professional use in the industrial sector, in laboratories, in telecommunications, for workshops with electronic devices as well as for production facilities and testing institutes. The linear technology results in low residual ripple and low noise. Due to the large LED display, you can easily read the set values of the output voltage, current and power at any time. Even when the lighting is bad, the digits are easy to read. In addition, the individual displays are provided with their respective unit abbreviations, so that the current and voltage can be clearly distinguished at any time. There are four memory spaces for frequently-repeated current values, so you can easily call them up again. You can connect the device to a computer via a RS485 interface using the Modbus communication protocol. The user-friendly lab power supply can be controlled very easily and conveniently via rotary knobs and buttons. The knobs allow for precise adjustment for the desired current from 0 to 30 V DC and output voltage from 0 to 10 A. During the adjustment, you can check the respective values on the large LED display and easily adapt them to your needs. Furthermore, the power supply unit has a control panel lock to prevent accidental changing of the set parameters. When the laboratory power supply operates as a constant voltage source (CV), the device switches automatically to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. With the adjustable laboratory power supply, you get an device with a high safety standard: The device has an overvoltage protection (OVP), an overcurrent protection (OCP), an overload protection (OPP), a current limitation and a special overheating protection (OTP). The integrated fan adapts to the internal temperature conditions and ensures optimal cooling. These precautions guarantee safe operation of the power supply, even with intensive and permanent use. The device also has a buzzing alarm, which informs you about safety deficiencies. Non-slip rubber feet additionally ensure a secure stand of the device and also protect the footprint from unwanted scratches. With the lab power supply from Stamos Soldering, you get a thoroughly professional device for the individual direct current supply of various external equipment. Download software
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859035677
Stamos Soldering Laboratory Power Supply price is about 109 £ . This product can be found in Laboratory Equipment
The bench power supply S-LS-34 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunication sector, workshops with electronic devices and production facilities. The linear technology used means the device produces only a low ripple and low noise. The device also has a high adjustment and display resolution of 100 mV / 10 mA. Whether you're a professional in development or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The values are shown to the fourth digit on the LED screen, so that even the most accurate values can be represented. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 100 mV / 10 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. This bench power supply has special knobs that allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 5 A. During adjustment, you can observe the values in question on the large LED display and easily modify them to meet your needs. The power supply also has a built-in overheat protection which starts the cooling fan as soon as the device temperature rises above 40 °C. The fan ceases to run once the device reaches 35 °C. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4250928680150
Stamos Soldering Laboratory Power Supply price is about 99 £ . This product can be found in Laboratory Equipment
The bench power supply S-LS-85 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 5 A. During adjustment, you can monitor the values in question on the large LED display and easily modify them to meet your needs. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859948359
Stamos Soldering Laboratory Power Supply price is about 339 £ . This product can be found in Laboratory Equipment
The bench power supply S-LS-42 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces only a low ripple and low noise. The device also has a high adjustment and display resolution of 100 mV / 10 mA. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 100 mV / 10 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. This bench power supply has special knobs that allow you to make both rough and fine adjustments to the desired current values from 0 to 15 V DC and 0 to 60 A. During adjustment, you can observe the values in question on the large LED display and easily modify them to meet your needs. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4250928680235
Stamos Soldering Laboratory Power Supply price is about 269 £ . This product can be found in Laboratory Equipment
The bench power supply S-LS-77 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 60 V DC and 0 to 10 A. During adjustment, you can monitor the values in question on the large LED display and easily modify them to meet your needs. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859948274
Stamos Soldering Bench Power Supply price is about 179 £ . This product can be found in Industrial Appliances
The bench power supply S-LS-31 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunication sector, workshops with electronic devices and production facilities. The linear technology used means the device produces only a low ripple. The device also has a high adjustment and display resolution of 10 mV / 1 mA. The benchtop dual power supply is also equipped with an RS232 and USB port for remote operation and data collection via PC. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the two large and colourful LED displays , you can easily read the set voltage and current at any time. The values are shown to the fourth digit on the LED screens, so that even the most accurate values can be represented. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 10 mV / 1 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the digital buttons. The device also has four memory function buttons for retrieving settings. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. The laboratory power supply unit also has a control panel lock to prevent the set parameters from being accidentally changed. This power supply has special knobs that allow you to make both rough and fine adjustments to the desired current values, guaranteeing precision. During adjustment, you can observe the values in question on the large LED displays and easily modify them to meet your needs. The dual power supply is made of sturdy sheet steel which guarantees high resilience and a long service life. The device emits a beeping sound when it is turned on or off which can likewise be turned on or off. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight, and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct...
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4250928683625
Stamos Soldering Bench power supply price is about 149 £ . This product can be found in Industrial Appliances
The bench power supply S-LS-30 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunication sector, workshops with electronic devices and production facilities. The linear technology used means the device produces only a low ripple. The device also has a high adjustment and display resolution of 10 mV / 1 mA. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the two large and colourful LED displays, you can easily read the set voltage and current at any time. The values are shown to the fourth digit on the LED screens, so that even the most accurate values can be represented. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 10 mV / 1 mA. The lab power supply unit also has four memory spaces. With the laboratory power supply you get an apparatus with a high safety standard: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP) and a special overheating protection (OTP), which automatically activates an integrated fan as soon as the maximum temperature is exceeded. This safety system guarantees safe operation of the power supply, even with intensive and long-term use. Furthermore, the power supply has a control panel lock to prevent accidental changing of the set parameters. The desired amperage can also be set individually on this laboratory power supply using special rotary controls. The rotary controls allow both a coarse and a fine adjustment of the values and thus guarantee an exact setting option for the desired current intensity. During the setting you can observe the respective values on the large LED displays and easily adapt them to your needs. The dual power supply is made of sturdy sheet steel which guarantees high resilience and a long service life. The device emits a beeping sound when it is turned on or off which can likewise be turned on or off. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight, and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4250928683618
Stamos Soldering Bench Power Supply price is about 479 £ . This product can be found in Industrial Appliances
The bench power supply S-LS-59 reliably provides direct current to external devices, with individually-adjustable current and voltage. It can be used for professional applications in industry, labs, the telecommunications sector, workshops with electronic devices and production facilities. This piece of industrial equipment also has a high display resolution of 1 mV / 1 mA. Thanks to the two 5-digit LED displays , you can easily and precisely read the set voltage and current at any time. The digits are easy to read even in poor light conditions. The user-friendly laboratory power supply can be easily and conveniently controlled via the control knobs. The knobs allow you to make both rough and fine adjustments to the values, thereby guaranteeing precise settings options for the desired current intensity. The voltage or current can be fine-tuned to 2 mV / 5 mA. The device also has five memory function buttons for retrieving settings. A soft signal will sound for monitoring purposes if values are changed. You can connect the device to a computer via the USB, RS-232 or LAN interfaces. This benchtop power supply unit meets the highest standards of safety: The adjustable lab power supply is equipped with an overload protection (OVP) and an overcurrent protection (OCP). It is also protected from overheating with a fan. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. The laboratory power supply unit also has a control panel lock to prevent the set parameters from being accidentally changed. The quiet operation is extremely pleasant, especially for longer periods of use. The lab power supply is made of sturdy sheet steel which guarantees high resilience and a long service life. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4062859977076
Stamos Soldering Laboratory Power Supply price is about 109 £ . This product can be found in Laboratory Equipment
The laboratory power supply S-LS-33 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply is very quiet and is perfect for use in schools or for hobbies. The linear technology used means the device produces only a low ripple and low noise. The device also has a high adjustment and display resolution of 100 mV / 10 mA. Whether you're a professional in development or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The values are shown to the fourth digit on the LED display, so that even the most accurate values can be represented. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 100 mV / 10 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. This power supply has special knobs that allow you to individually adjust the desired current. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 3 A. During adjustment, you can observe the values in question on the large LED display and easily modify them to meet your needs. The power supply also has a built-in overheat protection which starts the cooling fan as soon as the device temperature rises above 40 °C. The fan ceases to run once the device reaches 35 °C. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Condition: new
Disponibility: in_stock
Delivery Time: 4-6 workdays
EAN: 4250928680143
